Concrete Release Agent CRETE-LEASE® 20-VOC-XTRA – Bulk Sizes Cresset

Concrete Release Agent CRETE-LEASE® 20-VOC-XTRA – Bulk Sizes

• Sold in cases of 12 Aerosol Cans, single Gallon Jugs, and cases of 4 Gallon Jugs.
• If you want just a single can, Single Cans 20-VOC Sold Here.
• Eco-Responsible version of the standard 880 release!
• Odorless! 20-VOC-XTRA is Water-based.  The disadvantage is that it can freeze. 
• Not recommended to ship during cold weather, due to freezing risk (and this product in Aerosol Can cannot ship via any AIR (no UPS Next Day, 2-Day, or 3-Day Select allowed, so please don’t select at checkout).
• Gallon size is NOT aerosol (pressurized) and so gallon jugs sizes CAN be shipped Next Day Air if needed to prevent freeze risk (available when you check out)
• Non-toxic, non-flammable release agent meets rigid OSHA, EPA and the lowest VOC rules. 
• Permits easy, stain-free removal of forms or formliners from hardened concrete without bugholes.
• Crete Lease 20-VOC-XTRA is an Aeresol Release for Fiberglass Molds, Form Liners, and is also safe for more delicate forms like latex molds.

Release Guide:

• Since we carry a number of Release agents, here is a quick guide to each:
• Crete-Lease 880-VOC-XTRA (Sold here: Aerosol Cans & Gallon Jugs)
• Crete-Lease 20-VOC-XTRA (Sold here: Aerosol Cans & Gallon Jugs)
• Crete-Lease Splatter-Kote (Sold here)
• Stamping Release Liquid, Bubble Gum Release (Sold here: Gallon)
• Stamping Antique Release Powders (Sold here: Pails)

Concrete Release Agent CRETE-LEASE® 20-VOC-XTRA – Bulk Sizes

• Cuts form clean-up time up to 70% when properly applied
• Doesn’t interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied
• Sprays upside down, or rightside up.
• Can be applied in sub-freezing or very hot temperatures
• Reduces incidences of skin rashes
• Promotes longer form life for wood based forms, by acting as a water repellent from inside the wood
• Produces high visual impact (CCS 1) concrete surfaces
• Does not stain or stick from steam curing
  • Limitations: A) Not recommended for forms or form liners made from expanded polystyrene. B) Although subfreezing temperatures have no effect on the releasing action of Crete-Lease 880, temperatures below freezing promote thicker film thicknesses which causes more bugholes.
• Applicable Standards: Exceeds California’s SCAQMD rule 1113-90 (160 g/L). “Cresset Concrete Standards”, a photographic appearance guide. Corps of Engineers, “Civil Works Construction Guide Specifications,” CW-03101, Section 5.3 and Section 8. Corps of Engineers, “Guide Specification Military Construction,” CEGS-03300, Section 10.8.
  

Technical Data Concrete Release Agent CRETE-LEASE® 20-VOC-XTRA – Bulk Sizes:

• 20-VOC-XTRA Data Sheet
• Coverage: 1500 sq. ft. per can (Aerosol- Please note that Aerosols cannot ship via UPS Air (Next Day, 2-Day, or 3-Day Select)
• Coverage (hard/smooth surface): 1,000 sq. ft. per gal
• Coverage (pre-oiled plywood): 900 sq. ft. per gal
• Coverage (untreated plywood): 700 sq. ft. per gal
• Type: Opacity: Clear
• Freeze Damage: Yes.
• Flash Point: Not applicable
• Viscosity (centipoises): Not applicable
• Solids: None
• Density: 7.37 lbs/gal
• VOC (Volatile Organic Compounds): 160 g/l
• Composition: A proprietary blend.
• Keeps up to 8 months-to-one year (when sealed) at temps from 40◦ F to 100◦ F ▪ 

Form Material Compatibility:

• Plywood: All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO). Fiberglass, ABS, PVC, Epoxy, Urethane, Silicone, Steel, Aluminum, Wood.

Application:

• Apply minutes, hours, or days before placing concrete.
• Form surfaces must be clean, and dry.
• For best results, apply an ultra-thin film.
• Spray or wipe the release on. If runs or puddles occur, wipe them off.

Application Tips (from the manufacturer, Cresset):