Concrete Mold Form Release Agent, Crete Lease 880 Spray Cresset

Concrete Mold Form Release Agent, Crete Lease 880 Spray

• The environmentally friendly industry staple Crete-Lease 880 is a proprietary blend is comprised of neutralized vegetable oils in mineral oil that contains no waxes, silicones, or carcinogens; it’s also solventless and non-toxic.  Notably, this advanced composition exceeds Federal, OTC State, and California (250 g/L) VOC Regulations.  The end result mimics the surface of molds and site amenities with a superior finish for visually stunning concrete surfaces – without bugholes.

• Crete Lease 880 is available in cans as an Aerosol Release, or gallon jugs. Case quantity and Gallon sizes are sold here.
• Uses include: Rubber (polyurethane) Molds, Fiberglass Molds, Form Liners, and concrete forms and casting (880-VOC is not for natural rubber or latex- use the 20-VOC-XTRA Release product for natural rubber or latex molds) 
• Crete-Lease 880 permits easy, stain-free removal of forms, formliners, pallets, etc. from hardened concrete
• Cuts form clean-up time up to 70% when properly applied
• Reduces bugholes on concrete surfaces
• Doesn’t interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied
• Sprays upside down, or rightside up.
• Can be applied in sub-freezing or very hot temperatures
• Reduces incidences of skin rashes
• Promotes longer form life by acting as a water repellent from inside the wood
• Produces high visual impact (CCS 1) concrete surfaces
• Does not stain or stick from steam curing
  • Limitations: A) Not recommended for forms or form liners made from expanded polystyrene, SBR, or natural rubber, or latex. B) Although subfreezing temperatures have no effect on the releasing action of Crete-Lease 880, temperatures below freezing promote thicker film thicknesses which causes more bugholes.
• Applicable Standards: Exceeds California’s SCAQMD rule 1113-90 (250 g/L). “Cresset Concrete Standards”, a photographic appearance guide. Corps of Engineers, “Civil Works Construction Guide Specifications,” CW-03101, Section 5.3 and Section 8. Corps of Engineers, “Guide Specification Military Construction,” CEGS-03300, Section 10.8.
  

Concrete Mold Form Release Agent, Crete Lease 880 Spray Technical Data:

• 880-VOC Release Data Sheet
• Coverage: 1500 sq. ft. per can (Aerosol- Please note that Aerosols cannot ship via Air (Next Day, 2-Day, or 3-Day Select)
• Coverage (hard/smooth surface): 1,600 sq. ft. per gal
• Coverage (pre-oiled plywood): 1,100 sq. ft. per gal
• Coverage (untreated plywood): 800 sq. ft. per gal
• Color: Straw
• Opacity: Clear
• Freeze Damage: None. Freeze Temperature: -15F
• Flash Point: Not applicable
• Viscosity (centipoises): Not applicable
• Solids: None
• Density: 7.37 lbs/gal
• VOC (Volatile Organic Compounds): 245 g/l
• Composition: A proprietary blend of neutralized vegetable oils in mineral oil. Contains no waxes, no silicones…no carcinogens.

Form Material Compatibility:

• Plywood: All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO). Fiberglass, ABS, PVC, Epoxy, Urethane, Silicone, Steel, Aluminum, Wood.

Application:

• Apply minutes, hours, or days before placing concrete.
• Form surfaces must be clean, and dry.
• For best results, apply an ultra-thin film.
• Spray or wipe the release on. If runs or puddles occur, wipe them off.