Concrete Epoxy Paint Sealer Stripper, Eco-Friendly Soy Gel 600GL Franmar

<iframe width="700" height="225" src="https:// 

Coverage:

• Coverage per square foot varies depending on the type and age of coatings, number of layers and method of application.
• Horizontal: Average coverage is 125 sq. ft. per gallon (max 200 sq. ft. per gallon)
• Vertical: Average coverage is 75 sq. ft. per gallon

Documentation:

• View the SoyGel Application Sheet TDS.
• View the SoyGel  SDS.

Application:

• Test Area: Due to variances in surfaces and conditions, always test in a small, inconspicuous area before using on complete project.
• Application: Apply a thick layer of SOY GEL Paint and Urethane Stripper by pouring, brushing, squeegee, or commercial airless sprayer. Applying too thin will cause Paint and Urethane Stripper to dry out before removal is complete. Use a scraper to check if the coating is softened down to the surface (time varies, 10-15 minutes is common). If not, wait longer and recheck. When the coating is completely softened, remove with a scraper.
• Clean Up: Use a DG700 cleaner/degreaser (sold here) and a scrub brush, mop, or power washer to clean remaining thin residue. Remove excess coating(s) and SOY GEL Paint and Urethane Stripper before using a power washer for final cleaning. Allow surface to dry before further preparations.
• Usage Tips From The Pros:
  • For large application areas, use a professional airless sprayer or a 4-stage HVLP sprayer.
  • For tough coating or numerous layers, use a notched 1/2″ squeegee or 1/4″ gauge rake. Square footage will be greatly reduced.
  • When used outdoors, cover with a 2mil or thicker plastic to help keep Paint & Urethane Stripper wet and working.

FREQUENTLY ASKED QUESTIONS:

Q: Will 600GL dry out if left on for long periods of time?

A: Generally 600GL will not dry out quickly if left on for long periods of time. If it is left in direct sun light, hot or windy environments, this will accelerate the product drying out. Using a thin mil plastic, and laying it lightly over the product will help keep it moist and working for long periods of time. 

Q: How much coverage will I get?

A: Coverage is hard to estimate sometimes without doing a test area. Coverage per square foot varies depending on the type and age of coatings, number of layers, and method of application. Average coverage is estimated at 125 sq. ft. per gallon for horizontal surfaces and 75 sq. ft. for vertical surfaces. 

Q: Will 600GL remove epoxy coatings?

A: 600GL will remove some epoxy and other two part coatings. We suggest doing a test area before starting any project with epoxy or similar coatings.